User's Manual Part 2

Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex

(NG2)

8-22

Intro

Overview

Wi-Fi

Ethernet

System

IP/Video

MoCA

Specs

Figure 8-18 Common impairment signatures on the constellation graph

The first three normally indicate outside interference on the physical medium. A phase disturbance or

mismatch between the I and Q signals is usually caused by a malfunction of the modulation equipment.

8.8 System menu settings/controls (for RF)

Under System > System/Module Settings > MoCA-RF Module > RF, the following areas are available

that control RF module settings:

• Download RF Channel Guide(s) on page 8-23

• Thresholds on page 8-23

• RF Script settings on page 8-26

Moderate noise impairment Severe noise impairment

RF interference I/Q signal phase disturbance

Preliminary issue - Limited distribution only!