User's Manual Part 2

Tech-X Flex
®
(NG2) Tech-X Flex User Guide - Firmware v06.50
8-9
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
Figure 8-7 Lineup tab
Column Description
Chan Channel number or designation for the lineup. This
number/designation is used in test setup and results screens, as
applicable. For example, when you specify a channel for a Single
Channel Test, you should specify this value.
Name Channel name or abbreviation, for informational purposes within
the unit testing and results screens.
EIA Chan Channel number/designation from the standard list (see EIA CATV
tab on page 8-7) that this lineup number references. During
testing, the unit looks up frequency and channel type information
for the channel using this number. It must be specified exactly as it
appears in the configured EIA list.
EIA Video
Freq
Channel frequency (or video frequency, for analog channels),
drawn from the standard list based on the EIA Chan number (see
EIA CATV tab on page 8-7).
Type Channel type, which the unit uses to determine how testing should
be conducted on the channel. Valid values include:
• 64QAM (digital)
• 256QAM (digital)
• Analog
• QPSK (required for out-of-band (OOB) channels
Preliminary issue - Limited distribution only!