User's Manual Part 1
Table Of Contents
- 1: Introduction
- 2: Product Overview
- 2.1 Introduction to the workflow interface
- 2.2 Product overview
- 2.3 General product handling and operation
- 2.3.1 Protection from water and dust ingress
- 2.3.2 Important battery charging note
- 2.3.3 Powering on/off
- 2.3.4 Attaching the strap
- 2.3.5 About the touchscreen display
- 2.3.6 Selecting the active interface
- 2.3.7 Running a function or test
- 2.3.8 Repeating a function or test
- 2.3.9 Screen title bar buttons/icons
- 2.3.10 Capturing a screen image (screenshot)
- 2.3.11 Stopping a test
- 2.3.12 Saving results
- 2.3.13 Maximum test duration for continuous tests
- 2.3.14 Interpreting results
- 2.4 Handling the MoCA/RF module
- 2.5 Remote control of the unit
- 2.6 Licensed feature details
- 2.7 Maintenance
- 2.8 FTP information
- 2.9 Technical support
- 3: Wi-Fi Testing Menu
- 4: 10/100/1G Testing Menu
- 5: System Menu
- 5.1 Record Manager
- 5.2 Admin Port
- 5.3 Set Date and Time
- 5.4 Version Info
- 5.5 Battery Status
- 5.6 Video
- 5.7 Cal Touchscreen
- 5.8 Licensed Options
- 5.9 Update Firmware
- 5.10 System/Module Settings
- 5.10.1 System/Module Settings > Base Unit
- 5.10.2 System/Module Settings > RF Video Module
- 5.10.3 System/Module Settings > ADSL/VDSL2 Module
- 5.10.4 System/Module Settings > Combined Module Default
- 5.10.5 System/Module Settings > MoCA Module
- 5.10.6 System/Module Settings > DOCSIS Module
- 5.10.7 System/Module Settings > CSM Module
- 5.10.8 System/Module Settings > MoCA-RF Module
- 5.10.9 System/Module Settings > Wi-Fi
- 5.11 Signature Capture
- 5.12 Language Selection
- 5.13 Help and Support
- 5.14 System Information
- 5.15 Wizard GUI
Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex
®
(NG2)
3-8
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
Table 3-2 Connect (Wi-Fi Setup) - Setup parameters page 2
Security Type Type of security in use on the network:
• WEP-64 - Wired Equivalent Privacy using a 40-bit key
• WEP-128 - Wired Equivalent Privacy using a 104-bit key
• WPA-PSK or WPA2-PSK - Wi-Fi Protected Access (WPA or WPA2), pre-shared
key mode
• WPA-WPS - Enables the WPS options. The specific WPS option to use should
be specified for Key Type. For more information on WPS, see About WPS
support on page 3-4.
• NONE - No security (open access)
Parameter Description
Key Type and Key Type of key and the key itself, as follows:
•If Security Type=WPA-WPS, see About WPS support on page 3-4 for a
description of options for these fields.
•If Key Type=HEX, the Key must be a hexadecimal number. A hex digit
occupies four bits, so for WEP-64, a hex Key must be 10 digits (40 bits total).
For WEP-128, a hex Key must be 26 digits (104 bits total). For WPA-PSK, the
Key must be 64 digits (256 bits total).
•If Key Type=PASSPHRASE, the key must be the appropriate string that can
be converted to the correct key using the respective algorithms. For WEP-64,
a passphrase Key must be 5 characters/digits. For WEP-128, a passphrase
Key must be 13 characters/digits. For WPA-PSK, a passphrase Key must be
8 to 63 characters.
Also, note that after a successful WPS connection, the unit attempts to store the
underlying WPA authentication for future connection attempts. When successful,
the Key field will show WPS Acquired Key. For more information, see About
WPS support on page 3-4.
Parameter Description
Preliminary issue - Limited distribution only!