User's Manual Part 1
Table Of Contents
- 1: Introduction
- 2: Product Overview
- 2.1 Introduction to the workflow interface
- 2.2 Product overview
- 2.3 General product handling and operation
- 2.3.1 Protection from water and dust ingress
- 2.3.2 Important battery charging note
- 2.3.3 Powering on/off
- 2.3.4 Attaching the strap
- 2.3.5 About the touchscreen display
- 2.3.6 Selecting the active interface
- 2.3.7 Running a function or test
- 2.3.8 Repeating a function or test
- 2.3.9 Screen title bar buttons/icons
- 2.3.10 Capturing a screen image (screenshot)
- 2.3.11 Stopping a test
- 2.3.12 Saving results
- 2.3.13 Maximum test duration for continuous tests
- 2.3.14 Interpreting results
- 2.4 Handling the MoCA/RF module
- 2.5 Remote control of the unit
- 2.6 Licensed feature details
- 2.7 Maintenance
- 2.8 FTP information
- 2.9 Technical support
- 3: Wi-Fi Testing Menu
- 4: 10/100/1G Testing Menu
- 5: System Menu
- 5.1 Record Manager
- 5.2 Admin Port
- 5.3 Set Date and Time
- 5.4 Version Info
- 5.5 Battery Status
- 5.6 Video
- 5.7 Cal Touchscreen
- 5.8 Licensed Options
- 5.9 Update Firmware
- 5.10 System/Module Settings
- 5.10.1 System/Module Settings > Base Unit
- 5.10.2 System/Module Settings > RF Video Module
- 5.10.3 System/Module Settings > ADSL/VDSL2 Module
- 5.10.4 System/Module Settings > Combined Module Default
- 5.10.5 System/Module Settings > MoCA Module
- 5.10.6 System/Module Settings > DOCSIS Module
- 5.10.7 System/Module Settings > CSM Module
- 5.10.8 System/Module Settings > MoCA-RF Module
- 5.10.9 System/Module Settings > Wi-Fi
- 5.11 Signature Capture
- 5.12 Language Selection
- 5.13 Help and Support
- 5.14 System Information
- 5.15 Wizard GUI
Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex
®
(NG2)
2-60
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
Server IP address or domain name of the computer where the FTP server is running. This
computer will be the source for any files transferred to the unit and/or the
destination for any files transferred from it. The specific folder on the computer is
generally determined by the user account configured as described under FTP
server installation and setup on page 2-58 and specified below (User ID).
Port TCP port used by the FTP server, typically 21 (standard FTP port). The server port
can be changed in the server management application - see the server
documentation for more information.
User ID
Password
FTP authentication information, valid for a user account currently configured on
the FTP server. This account will be associated with a folder on the server
computer where files will be transferred to or from. For more information, see FTP
server installation and setup on page 2-58.
Server Folder Subfolder where files should be transferred to or from, relative to the user folder
configured as described under FTP server installation and setup on page 2-58.
This parameter is only applicable to some unit functions and may be optional. If it
remains unspecified or does not appear at all, all files will be transferred to or from
the “home directory” associated with the FTP user account (User ID).
Ping Before
Transfer
Runs a ping test to the server computer before the FTP attempt. If all ping
attempts fail, the FTP attempt is aborted. Not all FTP-related operations support
this parameter.
Admin port
information
FTP transaction screens also normally include information about the Admin Port,
which is the interface through which the FTP transaction will occur. If the FTP
action is a “download” action where a file is transferred to the unit, this information
is normally found in a Destination tab. Otherwise, it is found in a Source tab. In
either case, the screen provides:
• IP information about the currently-established Admin Port, if there is one.
-and-
• Buttons to set up an Admin Port which transport you to the standard Admin
Port setup screen, after which you will be returned to the applicable FTP
screen.
In all cases, you must have an Admin Port configured to complete the FTP
transaction, whether you have configured it beforehand or through the shortcuts in
the FTP area.
Preliminary issue - Limited distribution only!