User's Manual Part 1
Table Of Contents
- 1: Introduction
- 2: Product Overview
- 2.1 Introduction to the workflow interface
- 2.2 Product overview
- 2.3 General product handling and operation
- 2.3.1 Protection from water and dust ingress
- 2.3.2 Important battery charging note
- 2.3.3 Powering on/off
- 2.3.4 Attaching the strap
- 2.3.5 About the touchscreen display
- 2.3.6 Selecting the active interface
- 2.3.7 Running a function or test
- 2.3.8 Repeating a function or test
- 2.3.9 Screen title bar buttons/icons
- 2.3.10 Capturing a screen image (screenshot)
- 2.3.11 Stopping a test
- 2.3.12 Saving results
- 2.3.13 Maximum test duration for continuous tests
- 2.3.14 Interpreting results
- 2.4 Handling the MoCA/RF module
- 2.5 Remote control of the unit
- 2.6 Licensed feature details
- 2.7 Maintenance
- 2.8 FTP information
- 2.9 Technical support
- 3: Wi-Fi Testing Menu
- 4: 10/100/1G Testing Menu
- 5: System Menu
- 5.1 Record Manager
- 5.2 Admin Port
- 5.3 Set Date and Time
- 5.4 Version Info
- 5.5 Battery Status
- 5.6 Video
- 5.7 Cal Touchscreen
- 5.8 Licensed Options
- 5.9 Update Firmware
- 5.10 System/Module Settings
- 5.10.1 System/Module Settings > Base Unit
- 5.10.2 System/Module Settings > RF Video Module
- 5.10.3 System/Module Settings > ADSL/VDSL2 Module
- 5.10.4 System/Module Settings > Combined Module Default
- 5.10.5 System/Module Settings > MoCA Module
- 5.10.6 System/Module Settings > DOCSIS Module
- 5.10.7 System/Module Settings > CSM Module
- 5.10.8 System/Module Settings > MoCA-RF Module
- 5.10.9 System/Module Settings > Wi-Fi
- 5.11 Signature Capture
- 5.12 Language Selection
- 5.13 Help and Support
- 5.14 System Information
- 5.15 Wizard GUI
Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex
®
(NG2)
2-54
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
Table 2-12 License details
License
Affected hardware
component
Description
Constellation MoCA/RF module Enables the constellation graph for RF testing (see
About QAM and the constellation graph on
page 8-18).
Dual Ethernet Base unit Enables passive testing on the 10/100/1G interface.
More specifically, it allows the unit to be connected
in-line with an existing Ethernet link and mirror traffic
internally for analysis. Without this license, both
10/100/1G ports will operate normally for any other
type of testing, including the ability to bridge an
existing Ethernet link, but without traffic mirroring.
For more information, see Passive testing on
page 4-4.
Dual MoCA MoCA/RF module Allows the MoCA module to synchronize “in-line”
with a MoCA network; that is, act as a bridge for the
purpose of analyzing network traffic and related
testing. Without this option, the unit supports single-
port synchronization in a single direction only and
the Join MoCA Network In-Line menu item is
disabled. For more information, see Join MoCA
Network In-Line (Bridging and passive testing) on
page 7-19.
High Speed Data All Enables the use of the All Devices Packet Loss
test on all applicable IP interfaces. For more
information, see All Devices Packet Loss (Device
Discovery) on page 6-19.
IP Video All Enables IP video quality and channel change testing
on all applicable interfaces. For more information,
see IP Video testing on page 6-22.
L4 Performance
Testing
All Enables iPerf-based TCP testing (see L4
Performance Test on page 6-7).
Preliminary issue - Limited distribution only!