User's Manual Part 1
Table Of Contents
- 1: Introduction
- 2: Product Overview
- 2.1 Introduction to the workflow interface
- 2.2 Product overview
- 2.3 General product handling and operation
- 2.3.1 Protection from water and dust ingress
- 2.3.2 Important battery charging note
- 2.3.3 Powering on/off
- 2.3.4 Attaching the strap
- 2.3.5 About the touchscreen display
- 2.3.6 Selecting the active interface
- 2.3.7 Running a function or test
- 2.3.8 Repeating a function or test
- 2.3.9 Screen title bar buttons/icons
- 2.3.10 Capturing a screen image (screenshot)
- 2.3.11 Stopping a test
- 2.3.12 Saving results
- 2.3.13 Maximum test duration for continuous tests
- 2.3.14 Interpreting results
- 2.4 Handling the MoCA/RF module
- 2.5 Remote control of the unit
- 2.6 Licensed feature details
- 2.7 Maintenance
- 2.8 FTP information
- 2.9 Technical support
- 3: Wi-Fi Testing Menu
- 4: 10/100/1G Testing Menu
- 5: System Menu
- 5.1 Record Manager
- 5.2 Admin Port
- 5.3 Set Date and Time
- 5.4 Version Info
- 5.5 Battery Status
- 5.6 Video
- 5.7 Cal Touchscreen
- 5.8 Licensed Options
- 5.9 Update Firmware
- 5.10 System/Module Settings
- 5.10.1 System/Module Settings > Base Unit
- 5.10.2 System/Module Settings > RF Video Module
- 5.10.3 System/Module Settings > ADSL/VDSL2 Module
- 5.10.4 System/Module Settings > Combined Module Default
- 5.10.5 System/Module Settings > MoCA Module
- 5.10.6 System/Module Settings > DOCSIS Module
- 5.10.7 System/Module Settings > CSM Module
- 5.10.8 System/Module Settings > MoCA-RF Module
- 5.10.9 System/Module Settings > Wi-Fi
- 5.11 Signature Capture
- 5.12 Language Selection
- 5.13 Help and Support
- 5.14 System Information
- 5.15 Wizard GUI
Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex
®
(NG2)
2-10
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
SPEED TEST Synchronizes with a MoCA network
and then runs either a L4
Performance Test or an NDT-based
Speed Test. Standard input
parameters for the speed testing
apply.
• On the input parameters required for the
synchronization, see Join MoCA
network setup parameters on page 7-5.
• On the input and result parameters for
the L4 Performance Test, see L4
Performance Test on page 6-7.
• On the input and result parameters for
the Speed Test, see Speedtest on
page 6-17.
PACKET LOSS Synchronizes with a MoCA network
and then guides the user through a
Packet Loss Test. Standard test input
parameters apply.
• On the input parameters required for the
synchronization, see Join MoCA
network setup parameters on page 7-5.
•On Packet Loss Test testing, see
Single Device PLT on page 6-11.
VOD SCORING Synchronizes “inline” with a MoCA
network and then runs a Video QoS
test. This workflow requires several
setup steps, including the connection
of the unit inline with the network, the
physical initiation of a VoD stream on
the network and the entry of several
complex setup parameters. The setup
and results of the Video QoS test use
classic view screens.
• On the input parameters required for the
synchronization, see Join MoCA
Network In-Line (Bridging and passive
testing) on page 7-19.
• On the setup and results of the Video
QoS test, see Video QoS (Quality of
Service) on page 6-23.
Workflow Description/notes For more information
Preliminary issue - Limited distribution only!