User's Manual Part 1
Table Of Contents
- 1: Introduction
- 2: Product Overview
- 2.1 Introduction to the workflow interface
- 2.2 Product overview
- 2.3 General product handling and operation
- 2.3.1 Protection from water and dust ingress
- 2.3.2 Important battery charging note
- 2.3.3 Powering on/off
- 2.3.4 Attaching the strap
- 2.3.5 About the touchscreen display
- 2.3.6 Selecting the active interface
- 2.3.7 Running a function or test
- 2.3.8 Repeating a function or test
- 2.3.9 Screen title bar buttons/icons
- 2.3.10 Capturing a screen image (screenshot)
- 2.3.11 Stopping a test
- 2.3.12 Saving results
- 2.3.13 Maximum test duration for continuous tests
- 2.3.14 Interpreting results
- 2.4 Handling the MoCA/RF module
- 2.5 Remote control of the unit
- 2.6 Licensed feature details
- 2.7 Maintenance
- 2.8 FTP information
- 2.9 Technical support
- 3: Wi-Fi Testing Menu
- 4: 10/100/1G Testing Menu
- 5: System Menu
- 5.1 Record Manager
- 5.2 Admin Port
- 5.3 Set Date and Time
- 5.4 Version Info
- 5.5 Battery Status
- 5.6 Video
- 5.7 Cal Touchscreen
- 5.8 Licensed Options
- 5.9 Update Firmware
- 5.10 System/Module Settings
- 5.10.1 System/Module Settings > Base Unit
- 5.10.2 System/Module Settings > RF Video Module
- 5.10.3 System/Module Settings > ADSL/VDSL2 Module
- 5.10.4 System/Module Settings > Combined Module Default
- 5.10.5 System/Module Settings > MoCA Module
- 5.10.6 System/Module Settings > DOCSIS Module
- 5.10.7 System/Module Settings > CSM Module
- 5.10.8 System/Module Settings > MoCA-RF Module
- 5.10.9 System/Module Settings > Wi-Fi
- 5.11 Signature Capture
- 5.12 Language Selection
- 5.13 Help and Support
- 5.14 System Information
- 5.15 Wizard GUI
Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex
®
(NG2)
1-6
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
• This equipment should be used only by qualified personnel with a strong knowledge of the equipment
and the networks on which it is designed to operate. In all cases, all local safety and operational
protocols should be followed.
• Any usage of the equipment in a manner not specified by the manufacturer may impair features
related to safety and user protection. Additionally, such usage may void certain terms of the warranty.
1.6 Consignes de sécurité importantes
• Pour la sécurité de l'opérateur , cet équipement est destiné à être utilisé sur les équipements de
communications par câble qui est relié à la terre en conformité avec les articles 800 et 830 de NEC.
• La tension d'entrée maximale est de 42 VDC.
• Le circuit d'entrée/sortie coaxiale est classé comme CAT- II.
• Cet équipement doit être utilisé uniquement par un personnel qualifié avec une forte connaissance
de l'équipement et les réseaux sur lesquels il est conçu pour fonctionner. Dans tous les cas, la
sécurité locale et tous les protocoles opérationnels doivent être suivies.
• Toute utilisation de l'équipement d'une manière non spécifiée par le fabricant peut altérer les
fonctions relatives à la sécurité et à la protection de l'utilisateur. En outre, une telle utilisation peut
annuler certains termes de la garantie.
1.7 Documentation references
1. Multimedia over Coax Alliance. 09 Sept. 2008. <http://www.mocalliance.com>.
2. Federal Communications Commission. “Multichannel Video and Cable Television Service.”
Sec.§76.605 “Technical standards.” 18 Dec. 2008. <http://www.fcc.gov/mb/engineering/605.html>
3. National Cable & Telecommunications Association. “NCTA Recommended Practices For
Measurements On Cable Television Systems.” Third Edition. 2002.
4. Electronic Industries Association. “Cable Television Channel Identification Plan.” EIA IS-132. May
1994.
1.8 Technical support
If you need product assistance or want to report problems with the product or the documentation, please
contact us.
E-mail: support@spirent.com
Phone:
Preliminary issue - Limited distribution only!