User's Manual Part 1
Table Of Contents
- 1: Introduction
- 2: Product Overview
- 2.1 Introduction to the workflow interface
- 2.2 Product overview
- 2.3 General product handling and operation
- 2.3.1 Protection from water and dust ingress
- 2.3.2 Important battery charging note
- 2.3.3 Powering on/off
- 2.3.4 Attaching the strap
- 2.3.5 About the touchscreen display
- 2.3.6 Selecting the active interface
- 2.3.7 Running a function or test
- 2.3.8 Repeating a function or test
- 2.3.9 Screen title bar buttons/icons
- 2.3.10 Capturing a screen image (screenshot)
- 2.3.11 Stopping a test
- 2.3.12 Saving results
- 2.3.13 Maximum test duration for continuous tests
- 2.3.14 Interpreting results
- 2.4 Handling the MoCA/RF module
- 2.5 Remote control of the unit
- 2.6 Licensed feature details
- 2.7 Maintenance
- 2.8 FTP information
- 2.9 Technical support
- 3: Wi-Fi Testing Menu
- 4: 10/100/1G Testing Menu
- 5: System Menu
- 5.1 Record Manager
- 5.2 Admin Port
- 5.3 Set Date and Time
- 5.4 Version Info
- 5.5 Battery Status
- 5.6 Video
- 5.7 Cal Touchscreen
- 5.8 Licensed Options
- 5.9 Update Firmware
- 5.10 System/Module Settings
- 5.10.1 System/Module Settings > Base Unit
- 5.10.2 System/Module Settings > RF Video Module
- 5.10.3 System/Module Settings > ADSL/VDSL2 Module
- 5.10.4 System/Module Settings > Combined Module Default
- 5.10.5 System/Module Settings > MoCA Module
- 5.10.6 System/Module Settings > DOCSIS Module
- 5.10.7 System/Module Settings > CSM Module
- 5.10.8 System/Module Settings > MoCA-RF Module
- 5.10.9 System/Module Settings > Wi-Fi
- 5.11 Signature Capture
- 5.12 Language Selection
- 5.13 Help and Support
- 5.14 System Information
- 5.15 Wizard GUI
Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex
®
(NG2)
5-6
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
• System > Admin Port > WAN Remote Control - See Remote site remote control (via the internet)
setup on page 2-46.
• System > Admin Port > Wi-Fi Admin Port > AP Remote Control - See Local remote control (via a
Wi-Fi access point) setup on page 2-45.
Upon a successful Admin Port connection, the results screen includes shortcuts to the following:
• F/W Update (Firmware update - see Update Firmware on page 5-13)
• FTP File (Record manager file upload - see Record Manager > Upload Files on page 5-4)
• FTP IP Chan (IPTV channel guide download - see Download IPTV Channel Guide on page 5-8)
In all cases, when a shortcut is launched, any applicable information from the Admin Port configuration
is automatically transferred to the respective setup screen.
Note the following important items:
• In some situations, an active Admin Port may conflict with Ethernet/IP traffic on other interfaces,
especially if multiple interfaces are attempting to host traffic on the same subnet. For example, if you
are attempting to host IP traffic over a MoCA interface while you have an active 10/100/1G Admin
Port with the same router, issues may occur depending on the type of router. If any particular
scenario exhibits trouble, please contact Spirent for a feasibility analysis.
•An active 10/100/1G Admin Port is known to prevent proper functionality of the Bridge (ECB) mode
feature of the MoCA Module.
5.3 Set Date and Time
(System > Set Date and Time)
The date and time are used to timestamp all saved results in the Record Manager. They are also used
for various internal functions, described in this document elsewhere as appropriate.
The date and time must be entered using the following formats:
• Date - yyyy-mm-dd
• Time - hh:mm:ss
To set the date or time, select either parameter and press a number on the keypad to initiate the numeric
entry screen. You must enter all characters that are requested, using leading zeros as necessary to pad
empty spaces. For example:
09:10:00
Preliminary issue - Limited distribution only!