User's Manual Part 1
Table Of Contents
- 1: Introduction
- 2: Product Overview
- 2.1 Introduction to the workflow interface
- 2.2 Product overview
- 2.3 General product handling and operation
- 2.3.1 Protection from water and dust ingress
- 2.3.2 Important battery charging note
- 2.3.3 Powering on/off
- 2.3.4 Attaching the strap
- 2.3.5 About the touchscreen display
- 2.3.6 Selecting the active interface
- 2.3.7 Running a function or test
- 2.3.8 Repeating a function or test
- 2.3.9 Screen title bar buttons/icons
- 2.3.10 Capturing a screen image (screenshot)
- 2.3.11 Stopping a test
- 2.3.12 Saving results
- 2.3.13 Maximum test duration for continuous tests
- 2.3.14 Interpreting results
- 2.4 Handling the MoCA/RF module
- 2.5 Remote control of the unit
- 2.6 Licensed feature details
- 2.7 Maintenance
- 2.8 FTP information
- 2.9 Technical support
- 3: Wi-Fi Testing Menu
- 4: 10/100/1G Testing Menu
- 5: System Menu
- 5.1 Record Manager
- 5.2 Admin Port
- 5.3 Set Date and Time
- 5.4 Version Info
- 5.5 Battery Status
- 5.6 Video
- 5.7 Cal Touchscreen
- 5.8 Licensed Options
- 5.9 Update Firmware
- 5.10 System/Module Settings
- 5.10.1 System/Module Settings > Base Unit
- 5.10.2 System/Module Settings > RF Video Module
- 5.10.3 System/Module Settings > ADSL/VDSL2 Module
- 5.10.4 System/Module Settings > Combined Module Default
- 5.10.5 System/Module Settings > MoCA Module
- 5.10.6 System/Module Settings > DOCSIS Module
- 5.10.7 System/Module Settings > CSM Module
- 5.10.8 System/Module Settings > MoCA-RF Module
- 5.10.9 System/Module Settings > Wi-Fi
- 5.11 Signature Capture
- 5.12 Language Selection
- 5.13 Help and Support
- 5.14 System Information
- 5.15 Wizard GUI
Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex
®
(NG2)
5-4
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
5.1.3 Record Manager > Screen Capture Files
This area allows you to preview and/or delete screen capture files currently stored in the Record
Manager (see Capturing a screen image (screenshot) on page 2-28). To upload screen capture files to a
remote computer, see Record Manager > Upload Files on page 5-4.
5.1.4 Record Manager > Upload Files
This function allows you to transfer record files from the unit to a remote computer, using one of the
following:
• FTP - Using one of the interfaces such as the Admin Port, files are transferred to a running FTP
server on a remote computer.
NOTE: FTP server setup is a separate task. For more information, see FTP information on
page 2-57.
• USB - Using the physical USB port on the unit, allows the files to be transferred to a USB storage
device such as a removable flash drive, then transferred from that device to a computer.
NOTE: Do not plug the unit directly into a computer.
At the bottom of the screen, the Start button initiates the transfer. The following table describes the
parameters in the various tabs that should be reviewed carefully before you click Start:
Table 5-2 Record Manager > Upload Files parameters
Tab Description
Destination
tab
Defines the method for the transfer:
• FTP - Requires FTP connection parameters for the remote FTP server. For more
information, see FTP connection parameters on page 2-59.
• USB - Requires a USB storage device, such as a removable flash drive, to be
physically connected to the unit. FTP connection parameters are not applicable.
Source tab For FTP only, defines the interface from which the FTP connection will be attempted. If
the interface is not currently configured with routable IP information, this tab also
provides fields for that information. When the transfer action is initiated, the unit will
attempt to configure the selected interface first.
Files tab Used to select the specific files that should be transferred and whether they should be
deleted from the unit following a successful transfer. Note that the list in this area
includes both test result files and screen capture files, as applicable.
Preliminary issue - Limited distribution only!