User's Manual Part 1
Table Of Contents
- 1: Introduction
- 2: Product Overview
- 2.1 Introduction to the workflow interface
- 2.2 Product overview
- 2.3 General product handling and operation
- 2.3.1 Protection from water and dust ingress
- 2.3.2 Important battery charging note
- 2.3.3 Powering on/off
- 2.3.4 Attaching the strap
- 2.3.5 About the touchscreen display
- 2.3.6 Selecting the active interface
- 2.3.7 Running a function or test
- 2.3.8 Repeating a function or test
- 2.3.9 Screen title bar buttons/icons
- 2.3.10 Capturing a screen image (screenshot)
- 2.3.11 Stopping a test
- 2.3.12 Saving results
- 2.3.13 Maximum test duration for continuous tests
- 2.3.14 Interpreting results
- 2.4 Handling the MoCA/RF module
- 2.5 Remote control of the unit
- 2.6 Licensed feature details
- 2.7 Maintenance
- 2.8 FTP information
- 2.9 Technical support
- 3: Wi-Fi Testing Menu
- 4: 10/100/1G Testing Menu
- 5: System Menu
- 5.1 Record Manager
- 5.2 Admin Port
- 5.3 Set Date and Time
- 5.4 Version Info
- 5.5 Battery Status
- 5.6 Video
- 5.7 Cal Touchscreen
- 5.8 Licensed Options
- 5.9 Update Firmware
- 5.10 System/Module Settings
- 5.10.1 System/Module Settings > Base Unit
- 5.10.2 System/Module Settings > RF Video Module
- 5.10.3 System/Module Settings > ADSL/VDSL2 Module
- 5.10.4 System/Module Settings > Combined Module Default
- 5.10.5 System/Module Settings > MoCA Module
- 5.10.6 System/Module Settings > DOCSIS Module
- 5.10.7 System/Module Settings > CSM Module
- 5.10.8 System/Module Settings > MoCA-RF Module
- 5.10.9 System/Module Settings > Wi-Fi
- 5.11 Signature Capture
- 5.12 Language Selection
- 5.13 Help and Support
- 5.14 System Information
- 5.15 Wizard GUI
Tech-X Flex User Guide - Firmware v06.50 Tech-X Flex
®
(NG2)
5-2
Intro
Overview
Wi-Fi
Ethernet
System
IP/Video
MoCA
RF
Specs
specify otherwise. If you do not have the need for multiple record files, the default record may be
sufficient for general use.
For screen capture files, each capture is stored in a separate file that is named at the time of the capture.
For more information, see Capturing a screen image (screenshot) on page 2-28).
NOTE: All files in the Record Manager remain on the unit until purposefully deleted. A unit shutdown
will not delete record data.
The unit has no specific maximum number of record files or maximum amount of results that any record
can contain. However, it does have a certain overall limit related to the constraints of physical memory. A
general rule which might be useful is to have no more than 30 general record files on the unit at once,
each with no more than 20 sets of test results. The actual numbers can vary, though, especially
considering the type of results you are saving. For example, the results data set from a video test is many
times larger than a ping test. Additionally, the presence of screen capture files can reduce the space
available for test results.
The following sections describe the individual Record Manager functions in more detail:
• Record Manager > Test Result Files on page 5-2 - Provides a viewer for test result files, along with
file management tools
• Record Manager > Signature Cap Files on page 5-3 - Reserved for future use
• Record Manager > Screen Capture Files on page 5-4 - Provides tools to view and/or delete screen
capture files
• Record Manager > Upload Files on page 5-4 - Provides tools for transferring Record Manager files
from the unit to a remote computer, including test result and screen capture files
5.1.1 Record Manager > Test Result Files
This function allows you to view and manage files currently on the unit. The actions that may be invoked
by the respective function key include:
Table 5-1 Record Manager functions
Function Description
New Creates a new record file. The name can have any alphanumeric name, often reflecting a
work order number or a customer location.
NOTE: Do not begin a record name with a period (N1 key), otherwise it will not
appear in the Record Manager.
Preliminary issue - Limited distribution only!