Operation Manual

17
TROUBLESHOOTING
Push elastic through and tie the ends together.
Insert one end
of fabric into
the other end
and sew. Do not
sew through
elastic.
CAUTION: Never use more than 2 layers of felt fabric at a time. Machine can jam.
PROBLEMS: SOLUTIONS:
1
Machine Goes On Stand By Mode Turn machine OFF/ON.
2
Flickering Lights 1. Batteries may be low and require changing.
2. Fabric may be jammed. See trouble shooting for Fabric Jams.
3
Loose Seams Stitch over weak spots once more to strengthen seam. The slower
you push the fabric through, the stronger the seam will be.
4
Fabric Jams 1. Turn machine OFF/ON - needles will reset to default position. OR
2. Turn machine OFF. Push in and turn the manual knob until the
needles are cleared of the fabric and Style String. Remove the
fabric and restart the machine.
7
8