User's Manual

19


U
SINGYOURTNSDEVICE
ToconnectyourProgrammertoyourTNS,pushthe
“Connect”buttononthePatientProgrammer.Movethe
PatientProgrammermagnetovertheTNSinacircular
motion.Thiswillallowyoutoadjuststimulationsettings
usingthePatientProgrammer.Toquicklyturnstimulation
off,presstheredbuttononthe
TNSformorethan2
secondsorpushthe“TurnallStimulationOFF”buttonon
theProgrammerscreen.Toenablestimulationafter
pressingeitherbutton,youmustconnectwithyourPatient
Programmerandturnthestimulationbackon.


U
SINGYOURINSDEVICE
Toconnectyour Programmerto your INS,push
the “Connect” button on the Patient
Programmer. Move the Patient Programmer
magnet over the implant location in a circular
motion.Thiswillallowyoutoadjuststimulation
settingsusingthePatientProgrammer.






YourSpinalModulationNeurostimulatorSystemcomplieswiththefollowing
InternationalStandards
• IEC60601‐1:2005
• IEC60601‐1‐11:2010
• IEC60601‐1‐2:2007
• ISO14708‐1:2000
• ISO14708‐3:2008
A
UTHORIZED EUROPEAN REPRESENTATIVE
MediTechStrategicConsultantsB.V.
Maastrichterlaan127‐129
6291ENVaals,Netherlands
C
OMPANY CONTACT INFORMATION
SpinalModulation,Inc.
1135O’BrienDrive
MenloPark,CA94025
U.S.A.
Telephone:(650)543‐6800(24hoursupportline)
Fax:(650)327‐2336
Email:[e-mail]