User's Manual
6
Warnings
TheWarningslistedbelowpertaintotheClinical Programmeronly:
• The investigator must be trained by Spinal Modulation personnel before using the Clinical
Programmer.
• Do not use the Clini cal Programmer with a NS device that appears to be faulty or fails to
properlycommunicate.
• Improper use of the
Clinical Programmer may cause irreversible injury to the patient.All
subjectsaretobeawakeandconversan tduringthep r oceduretominimizethelikelihoodofany
nervedamage.
• Always set the NS device amplitude to 0 µA when repositioning a lead or attaching the
Connector Cable to the external
TNS.When restarting stimulation, increase the NS amplitude
slowlyuntilthedesiredparesthesiaisachieved.
RFOperatingFrequencies
Nearby equipment emitting strong magnetic fields can interfere with RF communication, even if the
other equipment complies with CISPR emission requirements.The operating characteristics are as
follows:
MICSband:402‐405MHz
Theeffectiveradiatedpowerisbelowthelimitsasspecifiedin
Europe:ENETSI301839‐2
USA
FCC47CFRPart95;95.601‐95.673SubpartE,95.1201‐95.1219
FCCID:Y8L‐MN0700
This device may not interfere with stations operating in the 400.150–406.000 MHz band in the
Meteorological Aids, MeteorologicalSatellite, and Earth Exploration Satellite Servicesand mustaccept
anyinterferencereceived,includinginterferencethatmaycauseundesired
operation.