User's Manual
22
LeadTabs[Group>GroupName]
EachGroupcanbeconfiguredbyselectingthedesiredtab.
• Name:TheGroupcanberenamedhere(free‐form
textentry)
• For Patient Use: The Group will be displayed on
thePatientProgrammeronlyif thisboxischecked.
Note that the currently active Group must be
checked/enabled.
•
On Programmer / On Stimulator: These buttons
toggle to allow the user to view either the
Programmer values (possibly not programmed yet
to the Stimulator) or the values programmed on
theStimulator
• Lead1throughLead4: TheStimulusResponsefor
each Lead within a Group can be changed
here.
Stimulus Responses that have been previously
savedforthatLeadwillbeshowninthedropdown
menu.
• Response/Discard:UnwantedStimulusResponsedefinitionscanbediscardedhere.Thismay
beneededoncetheuserhasusedupthemaximumnumberofStimulusResponses(12).
TheSpinalModulation
NeurostimulatorSystemcomplieswiththefollowingInternationalStandards
• IEC60601‐1:2005
• IEC60601‐1‐11:2010
• IEC60601‐1‐2:2007
• ISO14708‐1:2000
• ISO14708‐3:2008
A
UTHORIZED EUROPEAN REPRESENTATIVE
MediTech Strategic Consultants B.V.
Maastrichterlaan 127-129
6291 EN Vaals, Netherlands
C
OMPANY CONTACT INFORMATION
Spinal Modulation, Inc.
1135 O’Brien Drive
Menlo Park, CA 94025
U.S.A.
Telephone: (650) 543-6800 (24 hour support line)
Fax: (650) 327-2336
Email: clinicalsupport@spinalmodulation.com