User's Manual


21
ImpedanceTabs[Stim>Impedance]
The impedance button (Ω) initiates impedance
measurementsbetweenadjacentelectrodecouplesinallof
theconfiguredleadsanddisplaysontheImpscreen.








MapWorkspace
Pressthe“Map”tabtoaccesstheMapWorkspace.
The Map Workspace allows you to define which lead
connects to each of the NS ports. It therefore provides the
ability to automatically move saved settings from one Port
toanother.
Eachleadisidentifiedbyitslocation(spinallevel)enteredin

theStimWorkspace.




GroupWorkspace
Pressthe“Group”tabtoaccessGroupWorkspace.
The Group Workspace is divided into four tabs (Groups) by default named “Awake”, “Sleeping”,
Exercising” and “Sleeping”). Each tab summarizes Group specific settings for each of the implanted
leads.TheseGroupscanbeeasilyprogrammedasneededbythepatientusingthePatient
Programmer.