User's Manual
11
ChangetheDate
Select the drop down arrow on the right side of the “Set
Date” box. A calendar will appear and you can set the
month,dayandyearusingyourstylus.
ChangetheTime
Tochangethetime(24hourformat),firstselectthehouror
minutefieldthatyouwouldliketochange.
To change the selected field, use the “Up” or “Down”
arrowstoincrease,decreaseortogglethesetting.
NOTE:Establishing a connection updates the NS
device’sclocktothenewlyset
time.
SwitchtoFCEProgrammer
By checking this box the Clinical Programmer will get
additional functionality, which should only be used by Spinal Modulation’s Field Clinical Engineers and
Staff.
EstablishingCommunicationwiththeNSDevice
To change the patient’s stimulation settings, you must first establish communication between the
ClinicalProgrammerandthepatient’sNSdevice.
1. Make sure that the Clinical Programmer is turned
onandtheMainMenuscreenisdisplayed
2. Press“ConnecttoStimulator”ontheMainMenu.
3. Selectthetextbox
nextto“StimulatorSN:”
4. Enter the serial number using the pop‐up
keyboard.TheProgrammeriscasesensitiveso use
uppercaselettersonly.
If the serial number format is valid for a NS device, the
“Connect”buttonwillbeenabled.
5. Pressthe“Connect”button.
After pressing the “Connect”
button, the “Cancel” button
becomes enabled. If the Cancel button is pressed, the
telemetryconnectioniscancelled.