SDS

Page 2 of 4 – Mercury Absorbent Powder
SECTION V: FIRE FIGHTING MEASURES:
EXTINGUISHING MEDIA: Unused form: smother with suitable dry powder. Do not allow water runoff to
enter sewers or waterways. Used form: that which is compatible to liquid(s)
being transferred.
SPECIAL FIRE FIGHTING PROCEDURES: Move container if possible and avoid breathing vapors or dust. Water may be
used to cool fire-exposed containers. Wear SCBA with full facepiece.
HAZARDOUS COMBUSTION PRODUCTS: Irritating or toxic fumes in a fire.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Closed containers exposed to heat may rupture due to pressure buildup
SECTION VI: ACCIDENTAL RELEASE MEASURES
SPILL OR LEAK PROCEDURES: Wear protective equipment. Ventilate area and remove ignition sources. Sweep
or vacuum in a manner that does not disperse zinc powder in the air and place
the zinc in a closed container for recovery or disposal.
SECTION VII: HANDLING AND STORAGE
HANDLING: Keep away from water. Minimize inhalation of vapors. Avoid skin contact. Keep
closed when not in use. Do not handle or store near strong oxidants.
STORAGE: Room temperature in well ventilated areas. Prevent product from freezing.
SHELF LIFE: >1 year, in original sealed package.
GENERAL: Refer to absorbed liquid(s) MSDS(s). The container can be hazardous when
empty. Follow label cautions even after the container is empty. Do not re-use
empty containers for food, clothing or products for human or animal
consumption, or where skin contact can occur.
SECTION VIII: EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS: General ventilation recommended.
RESPIRATORY PROTECTION: Supplied-air respiratory protection is recommended for confined spaces.
Product should be used only if sufficient ventilation is provided to prevent
inhalation of vapors.
GLOVES:
Impervious gloves.
EYE PROTECTION:
Safety glasses with side shields is a good industrial practice
OTHER:
Remove contaminated clothing and wash before reuse. Cleanse skin
thoroughly after contact
.
OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200):
EXPOSURE LIMITS 8 hrs. TWA (ppm)
OSHA PEL ACGIH TLV
Zinc respirable dust 5 mg/m
3
5 mg/m
3