Supplementary Document

SpillTech
Sales & Marketing
5440 McGinnis Village Place
Suite 102
Alpharetta, GA 30005
Phone: [phone]
Fax: [phone]
SpillTech
Manufacturing
Brookley Industrial Complex
1627 O’Donoghue Street
Mobile, AL 36615
Phone: [phone]
Polyurethane Chemical Compatibility Guide Page 1 of 2
Chemical Compatibility Guide
For Polyurethane Items
This Chemical Compatibility Guide is offered for informational purposes only and was developed from information sources
other than SpillTech. The information from such third party sources is believed to be reliable and accurate; however,
Purchaser should make its own determination of compatibility before using any SpillTech product.
It is the sole responsibility of the Purchaser to determine whether any product is suitable for Purchaser’s actual or
intended uses.
Due to the nature of softer urethane, the physical properties of these products may change with exposure to certain
environmental conditions like temperature, humidity and UV radiation. Please inspect the stored product regularly to
ensure it is in a usable state. Do not store or use in temperatures exceeding 120°F (49°C) for an extended period of time.
Typical life expectancy of urethane products is about 5 years.
NO GUARANTEE, WARRANTY, OR REPRESENTATION IS MADE, INTENDED, OR IMPLIED AS TO THE CORRECTNESS OR
SUFFICIENCY OF THE CHEMICAL COMPATABILITY GUIDE OR ANY INFORMATION SUPPLIED HEREIN. THE PRODUCTS
DISCUSSED HEREIN ARE SOLD WITHOUT ANY WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED. NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING CONDITIONS SHALL BE VALID UNLESS MADE IN WRITING AND MANUALLY
SIGNED BY AN OFFICER OF SPILLTECH. IT IS THE PURCHASER’S SOLE RESPONSIBILITY TO CONDUCT TESTING TO
ESTABLISH THE SUITABILITY OF ANY PRODUCT FOR PURCHASER’S INTENDED USE. LIABILITY OF SPILLTECH FOR ALL
CLAIMS, WHETHER ARISING OUT OF A BREACH OF CONTRACT, WARRANTY, NEGLIGENCE, STRICT LIABILITY, OR
OTHERWISE, IS LIMITED TO THE PURCHASE PRICE OF THE MATERIAL SUPPLIED.
KEY
Swelling (Visually rated from 0-2): 0 = None, 1 = Slight, 2 = Significant
Degradation (Visually rated from 0-2): 0 = None, 1 = Slight, 2 = Significant
RATINGS
GOOD: No swelling, no degradation
FAIR: Temperature increase and/or color change
ER: Not recommended for long-term, repeated contact with this liquid; suitable only for Emergency / Spill Response.
After contact with this liquid, the Blocker should be discarded.
Note: SpillCurb and SpillBerm Products that have been chemically degraded may be considered hazardous waste because
of their mixture with a hazardous liquid. Dispose of in accordance with Federal, State and Local requirements.
Chemical Name Swelling Degradation Rating Comments
Acetone 2 0 ER Slight swelling after 2 hrs
Acetonitrile 1 0 Fair Slight swelling after 4 hrs
Aluminum Salts 0 0 Good
Ammonia, Anhydrous 0 0 Good
Ammonium Hydroxide 0 0 Good
Barium Salts 0 0 Good
Benzyl Alcohol 1 1 Fair Slight swelling after 3.5 hrs
Boric Acid 0 0 Good
Butanol 0 0 Good
Calcium Chlorite 0 0 Good
Carbon Disulfide 1 0 Fair Slight swelling after 3.5 hrs
Chloroform 2 1 ER Degradation begins at 30 minutes
Cupric Chloride 0 0 Good
Cyclohexanone 1 2 ER