User guide

1. Clean your hands to prevent

ngerprint stain. Adjust the location

before remove vinly cover from the

lm. The lm is made smaller than

actual LCD size for easier applica-

tion.

2. Spray on the cloth with the clean-

ing kit included.

3. Make sure the device is table and

clean the surface of LCD. Carefully

wipe the dirt and stain.

Installation Guide

for Tablets

4. NEVER spray directly on your iPad

LCD.

5. Remove half of the vinyl covered

the lm and remove the rest as you

apply the lm on LCD.

6. If you nd any dust under the lm

after installation, use sticky-tape to

remove the dust as shown in the

picture.

PAGE 1
Installation Guide for Tablets 1. Clean your hands to prevent fingerprint stain. Adjust the location before remove vinly cover from the film. The film is made smaller than actual LCD size for easier application. 2. Spray on the cloth with the cleaning kit included. 3. Make sure the device is table and clean the surface of LCD. Carefully wipe the dirt and stain. 4. NEVER spray directly on your iPad LCD. 5. Remove half of the vinyl covered the film and remove the rest as you apply the film on LCD. 6.