M1 VIRTUAL REALITY Smartphone headset USER MANUAL
Thank you for choosing spieltek.
Precautions • Please read and follow these instructions, and keep this manual in a safe place. • Keep this unit away from water and any flammable gases or liquids. • Prolonged use may cause fatigue. • Use of the device may cause a loss of balance. Make sure that your surroundings are safe and secure before putting on the headset • Do not use while driving a vehicle. • Clean the unit with only a soft, dry cloth. • All images are for illustrative purposes only.
Overview A. B. C. D. Head strap Head strap loops Visor locking tab Size adjustment feet (×4) E. Lenses F. Focal adjusters G.
Attaching the Head Strap 1. Orient the T-strap with the fuzzy side facing out, and fit the three ends through the attachment loops on the sides and top of the headset. 2. Loop the ends over, and press them onto the touchfastener strips. 3. Continue to adjust the length of the straps until the visor sits comfortably on your face without putting too much pressure on the bridge of your nose.
Inserting the Phone 1. Open the visor by pulling the locking tab at the top of the headset. 2. Rest your phone on the two feet inside the visor. For smaller phones, remove the adjustment feet by sliding them off of the mounts, and replace them with the larger feet that are included with the headset. 3. Align the middle of the screen with the center bar inside the headset. 4. Close the visor until it snaps shut. Important! Be sure the visor is securely closed before proceeding.
Adjusting the Lenses Use the lens adjusters on the bottom of the headset to move each lens forward or back to compensate for nearor farsightedness until the picture is sharp and clear.
Using Your Phone with the VR-M1 Insert your phone into the headset, and close the visor. You can use wired headphones or attach a charging cable while using the headset by extending the cables through the gap between the visor and the headset. Important! You cannot access the screen while using the VR-M1 headset. To control your phone and camera while using the headset, use a Bluetooth remote like the Spieltek VR-BTR (available separately).
Specifications Compatibility Phones with screens 3.5 to 6 in. (8.9 to 15.2 cm) Lens size 40 mm Lens material Spherical resin Field of view 95° to 100° Dimensions (W × D × H) 7 × 5 × 4 in. (17.8 × 12.7 × 10.2 cm) Weight (without phone) 12.2 oz. (344.
One-Year Limited Warranty This Spieltek product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
To obtain warranty coverage, contact the Spieltek Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Spieltek along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense. For more information or to arrange service, visit www.spieltekgaming.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.
www.spieltekgaming.
