User's Manual

K
x
4
K
x
4
L
x
2
G
x
5
K
x
4
C1
C2
200 / 300 / 400 Series
Gaming Chair
Assembly Instructions
To avoid scratching, lay down a towel or other soft material
where you’re going to assemble the chair. It is necessary
to remove the preinstalled screws before assembling
some parts of the chair. We recommend assembling the
chair with two people.
1. Place the seat base flat on a soft surface.
2. Align the seat back with the seat-back brackets
attached to the seat base. Make sure the brackets are
pointing up at 90°. It may be necessary to remove any
fabric to ensure the screws can be inserted properly
[ Fig. 1 ].
3. Use the M8 hex key and screws to secure the seat
back to the seat-back brackets on each side [ Fig. 2 ].
4. Secure the upper side covers using the M6 screws
and hex key [ Fig. 3 ]. Make sure not to overtighten the
screws.
5. Flip the chair over, and rest the base against the wall
or over a table [ Fig. 4 ], so the four M8 holes face
upwards.
6. Align the tilt mechanism with the four M8 holes on the
bottom side of the seat base. Make sure the tilt tension
knob is toward the front of the chair.
7. Use the M8 screws and hex key to fasten the tilt
mechanism to the underside of the seat base
(Single-Arm Mechanism [ Fig. 5 ], Dual-Arm Mechanism
[ Fig. 6 ]).
8. Place the piston cover over the gas lift piston [ Fig. 7 ].
9. Insert the smaller end of the gas lift piston into the
center port of the tilt mechanism, and press down
firmly [ Fig. 8 ].
10. Align the hole in the wheel base with the base of the
gas lift piston, and press firmly until secure [ Fig. 9 ].
11. Insert the casters into the holes on the wheel base
[ Fig. 10 ].
12. Flip the chair upright onto the wheels, and make sure
everything is secure before use.
13. Attach the head rest and lumbar pillows for the leather
pillow set [Fig. 11] or the fabric pillow set [Fig. 12]
GG1
Single-Arm Mechanism Dual-Arm Mechanism
www.spieltekgaming.com Pillow Set A Pillow Set B
Fig. 3
Fig. 1 Fig. 2
Fig. 4
Fig. 5
Fig. 7 Fig. 8
Fig. 9 Fig. 10
Fig. 6
Fig. 11 Fig. 12