User's Manual

SpiderCloud Wireless, Inc.
Hardware Installation Guide for SmartCloud® Radio Node - SCRN 800
17
3. Using its own IP address, the SCRN sends a Join Request message to the SCSN.
The SCRN seeks to join the cellular network.
4. The Join Response from the SCSN will be one of the following:
— Join Grant: Permit the SCRN to join the SCSN.
— Redirect: Redirect the SCRN to join a different SCSN, if you have multiple
SCSN units configured in the network.
— Denied: The security signature on the SCRN does not match what the SCSN
expects. The client is untrusted and treated as a rogue device.
5. The arrival sequence begins. Based on the configuration of the SCRN, the SCRN will
join the system and get its configuration. The SCSN sends the SpiderCloud software
image (the system image and configuration settings) to the SCRN.
6. The SCRN reboots and mounts the SpiderCloud software image as a RAM-based file
system.
7. The SCRN contacts the SCSN and joins the network.
Related Documents
See the following documents for more information:
• SmartCloud® CLI Quick Start Guide Release 1.4 to configure the software
environment and internetworking between the SCSN and SCRN devices.
•See the Hardware Installation Guide for SmartCloud® Services Node - SCSN 8000
for hardware specifications and installation instructions.
• SCOS NB Data Model Reference for reference details about Operational Mode and
Configuration Mode commands.