User's Manual
Table Of Contents
- Table of Contents
- About this Manual
- Product Overview
- Radio Node Models
- Antennas
- Ports
- The Top-Panel LED
- Input Power
- System Specifications
- Compliance
- Radio Specifications
- Select the Radio Node Location
- Installation and Mount Bracket Assembly
- Boot Sequence and Services Node Communication
- Radio Node LED Boot Sequence
- Radio Node LED Management
- The SpiderCloud Documentation Set
- Appendix A: LTE Antenna Patterns
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide
16
Attach the mount bracket to the radio node as shown in Figure 11:
Figure 11 Radio Node Slides into Mount Bracket
Installing the Radio Node (Method 1)
Use this method with the quarter-inch bracket when routing the Ethernet cable through an opening where
the bracket will be mounted.
To route the cable directly and mount the radio node
Step 1 Cut a hole in the ceiling or wall to route the Ethernet cable through. Align the hole with the
bracket Ethernet cable entry hole.
Step 2 Route the Ethernet cable through the rectangular hole in the mounting bracket.
Figure 12 Mount Bracket with Direct Cable Routing
Bracket
Keyholes
Ethernet Cable
Entry Hole
SpiderCloud Wireless, Inc. Proprietary and Confidential