User's Manual

SpiderCloud Wireless, Inc.
5
SpiderCloud Radio Node - SCRN-200 Hardware Installation Guide
About this Manual
This guide provides the system specifications of the SpiderCloud® Radio Node 200 (SCRN-200). It
includes detailed hardware installation instructions, the boot sequence, and expected LED behavior both
during the boot-up and under operating conditions. An appendix shows the radio node antenna patterns.
The primary audience for this guide includes network planners, system administrators and installation
personnel. It assumes you have knowledge about networking principles, networking configuration, site
preparation, powering, and experience in hardware installation and maintenance.
System Overview
The SCRN-200 is a low-cost, low-power (100mW) base station designed for indoor use. The radio node is
3GPP compliant, supporting Universal Mobile Telecommunications System (UMTS) Release 6.
The radio node enables mobile operators to offer dedicated, in-building coverage and capacity for UMTS
services. It is easy to install and connects to the existing enterprise LAN using standard Ethernet cabling or
to a dedicated LAN infrastructure deployed for use by the operator. Radio nodes are managed by the
SpiderCloud Services Node 8000 (SCSN-8000) access controller, typically installed in the enterprise DMZ.
Figure 1 Radio Node Relationship to Enterprise and Mobile Operator Core Networks
LAN Intranet
DMZ
Enterprise
Mobile
Operator Core
Email Web
Radio Nodes
SGSN
MSC
IPSec
Backhaul
IPsec
Switch
Firewall
Security
Gateway
SCSN-8000
Iu-CS
Iu-PS
IPsec
HNB
Gateway
Iuh
SGSN
MSC
Option 1
Option 2
Iu-CS
Iu-PS
3G