User's Manual

SpiderCloud Radio Node - SCRN-200 Hardware Installation Guide
SpiderCloud Wireless, Inc.
17
Step 5 Slide the pedestal base of the radio node into the groove opening in the mount bracket.
When the pedestal reaches the end of the trough, a spring clip will secure the unit into
place.
Figure 17 Fully Mounted
Completing the Installation
Step 1 For radio nodes for use with external antennas, attach the antennas to the TNC
connectors. If the radio node is mounted on a horizontal surface, direct the antennas
downward. If it is mounted on a vertical surface, orient the antennas upward.
Figure 18 External Antenna Orientation
Ceiling
Wall