User's Manual

SpiderCloud Radio Node - SCRN-200 Hardware Installation Guide

SpiderCloud Wireless, Inc.

Installing the Radio Node (Method 2)

To route the cable directly and mount the radio node

Step 1 Route the Ethernet cable through the large hole in the mounting bracket.

Figure 15 Mount Bracket with Direct Cable Routing

Step 2 With two user-provided screws, attach the mount bracket assembly to a wall or ceiling. The

screw holes are sized for an M4 (#10) screw. Ensure the screws have a snug fit onto the

studs, sheetrock, anchor, or other material you are bolting onto.

Step 3 Insert the RJ-45 connector into the Ethernet port as shown in Figure 16:

Figure 16 Route and Terminate the Cable

Step 4 Push as much cable back through the wall or ceiling as possible. The mount bracket

assembly has room for some cable slack.

RJ-45 Connector in Ethernet Port