Spicer Drive Axles ® Illustrated Parts List AXIP-0054 June 2013 S110 Model
Table of Contents General Information........................................................................................................................................... 2 How To Use Illustrated Parts List..................................................................................................................... 2 Model Identification . ...................................................................................................................................... 3 Axle Parts Explode.
General Information General Information How To Use Illustrated Parts List Ordering Parts • • • This parts book is organized in sections according to parts servicing requirements. Use the Contents or page headings and colored tabs to find information. Use this book to order parts for your Dana® Spicer® Axle. For convenience, part numbers have been included for all pieces of the carrier assembly. Some of these parts, such as the carrier and caps, are serviced only in kits or assemblies.
Model Identification Model Identification Locating Model Designation Information • Axle Model Identification, Part Number and Serial Number are located on a tag at the axle centerline. This information will help to locate information in this book and to identify the correct parts for servicing. Drive Axles Drive Axle Assembly Tag 1. Country or origin 2. Axle model identification 3. Specification number assigned to the axle built by Spicer®.
Model Identification Using Model Designation to Identify Axle Components • The Axle Model Identification number contains information that is important to understand when purchasing service parts or new components. The Model Identification number provides important vehicle, capacity and application information and model features. Use this guideline to understand your Axle Model Identification. If you need assistance, contact your Roadranger representative.
Models Models The following models are included in this publication: Single Reduction Models Model Axle Capacity S110 15,500 Lbs Gear Size 12.25” (311 mm) Hypoid Gear, Nom. Single Reduction Models with Limited Slip Model Axle Capacity S110LS 15,500 Lbs Gear Size 12.25” (311 mm) Hypoid Gear, Nom.
Axle Parts Explode Axle Parts Explode 6
Axle Parts List Axle Parts List Item Part Name Qty S110 Notes CARRIER BEARING REBLD KIT (incls RTV) 504070 Contents Identified with • BEARING KIT - (less RTV) 504068 Contents Identified with * 1 Pinion Nut 1 130542 M36-1.
Carrier & Cap Kits / Pinion Brg Spacers Carrier Sub-Assembly - Item #10 Carrier & Cap Kit Part Number Sub Assy Part Number Base Part Number Casting Number Notes 514121 130511-NSS 130747-NSS 130500 ABS Design - Ford 504044 130739-NSS 130748-NSS 130737 Parking Brake Opt.
Gear & Pinion Kits Ring Gear & Pinion Identification Dana has highly developed primary axle gearing which is only used in matched sets. These sets are identified by the mating parts listed below. Within any Dana production drive axle or genuine Spicer® Gear & Pinion service kits, these mated part numbers will appear. Because they are developed as a set with precision machining, never mix gears and pinions from different mated sets within an axle. Shortened gearing life, noise and failure may occur.
Axle Housing Parts Explode Axle Housing Parts Explode 8 6, 7 6, 7 5 5 7 5 5 5 5 3 5 2 5 6 6 Carrier to Housing Fasteners (Viewed from front of axle) 4 9 5 4 6 1 Axle Housing Parts List Item Description 1 Axle Shaft 2 Axle Housing Assy 3 Plug AXLE HOUSING HARDWARE KIT 4 Washer 5 Capscrew, Carrier to Hsg - Short 6 Capscrew, Carrier to Hsg - Long 7 Capscrew, Double-ended 8 Breather Valve Assy Kit 8A Breather Valve 9 Seal Driver - Pinion 10 Magnet - Axle Hsg (internal) 11 RTV Sealant 12 Th
Axle Housings Axle Housings The Dana Axle housings listed below have various bracket configurations specifically for the OEM's listed. Items such as Brake Line Clips and Brake Hose Brackets are not listed down in the feature column. Axle Series Tag I.D.
Axle Shafts Axle Shafts Dana S110 series axle shafts are used in “sets,” have unequal shaft lengths and may be “location specific” or “Wheel Equipment specific.” When replacing S110 axle shafts, locate the axle shaft part number or select the correct axle shaft from the chart below before placing your order. DO NOT MISPLACE AXLE SHAFTS FROM THEIR INTENDED LOCATION. Part No.
Service Carriers Service Carriers S110 Standard Carrier 12.25" (311 mm) Hypoid Gearing Side Gear # 130522 Ratio 3.73 3.91 4.10 4.30 4.56 4.78 4.88 5.13 5.38 5.57 5.86 6.14 6.50 Side Gear Spline 34 Inv 34 Inv 34 Inv 34 Inv 34 Inv 34 Inv 34 Inv 34 Inv 34 Inv 34 Inv 34 Inv 34 Inv 34 Inv New Carrier 676050 676052 676051 676053 676060 676057 676054 676061 676058 N/A N/A 676059 676056 S110FLR - Limited Slip / Parking Brake / Rolled Over 12.
Yokes & Flanges Yokes & Flanges Spicer yoke part numbers shown below are PRODUCTION part numbers and are for reference only. The part numbers needed for service may vary. Please contact Driveshaft Division for price & availability of service yokes. For additional Yoke information reference Dana Bulletin ABIB-0607. STYLE X STYLE Y STYLE Z Half Round Full Round Half Round Tapped Holes Bearing Strap A A A C B C B C S110 Series - 39 Inv.
Oil Seal Installation Tool / Service Kit Reference Listing Oil Seal Installation Tools Oil seal installation tools are available for installing drive axle pinion seals. Using these tools ensures proper installation of the seal. Failure to use these tools may result in an improperly installed or damaged seal. Oil Seal Driver Installation Tool Dana P/N 126917 Note you can find the 126917 included in optional Service Kit P/N 217414.
Dana Aftermarket Group PO Box 321 Toledo, Ohio 43697-0321 Warehouse Distributor: 1.800.621.8084 OE Dealers: 1.877.777.5360 www.spicerparts.com AXIP-0054 Printed in U.S.A. Copyright Dana Limited, 2013. All rights reserved. Dana Limited.
