User Guide

J300P-2
Spicer Life Series™ Flange Yokes
3 Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued  Part is available until supply is exhausted  Not sold separately
A B - Bolt Holes C G
Flange or Bolt Diameter Number Pilot Diameter Flange Illustration Spicer
Swing Circle D-Drilled of M-Male Face to Figure Part
Diameter Diameter
T-Tapped Holes F-Female Centerline Number
Figure 4
Figure 1
Figure 5
Figure 2
Figure 6
Figure 3
Side View of
Figures 1, 2 & 4
Side View of
Figures 3, 5 & 6
Important: See Safety Information in General Information Section (J300P-GI)
SPL90 SERIES E-5.380 (HR STYLE 4.958) D-1.625 USE KIT NO. SPL90X
5.906 5.118 .478-D 8 3.544F 3.281 2 90-2-29
Metric fl ange
6.688 6.124 .375-D 8 5.312M 2.750 5 90-2-49-1
B.S./H.R.style w/brake pilot.
6.688 6.124 .375-D 8 6.624M 3.280 2 90-2-19
8.000 7.250 .375-D 8 6.438M 2.750 5 90-2-39-1
B.S./H.R.style w/brake pilot.
8.000 7.250 .375-D 8 7.750M 2.750 5 90-2-69-1
Bearing strap/half round style
SPL100 SERIES E-5.380 D-1.626 USE KIT SPL100-1X
8.000 7.250 .375-D 8 6.438M 2.750 5 100-2-169-1
8.000 7.250 .399-D 8 7.750M 3.250 4 100-2-159•
SPL140 SERIES E-5.028 D-1.937 USE KIT SPL140-1X
8.000 7.250 .375-D 8 7.750M 3.070 5 140-2-99-1
Mates with std. 1710 series companion fl ange
8.000 7.250 .375-D 8 7.750M 3.070 2 140-2-59
Mates with std. 1710 series companion fl ange
8.000 7.250 .380-D 8 6.438M 2.953 5 140-2-69-1•
1/2 Rnd part W/spec GMC bolt hole size
8.000 7.250 .396-D 12 7.750M 3.070 2 140-2-19•
10mm bolt holes on 1810 bolt pattern
8.000 7.250 .439-D 12 7.750M 3.070 2 140-2-29•
Mates with std. 1810 series companion fl ange
SPL170 SERIES E-6.026 (HR STYLE 6.456) D-2.166 USE KIT SPL170X
7.087 5.906 .551-D 4 — 3.425 1 170-2-15
180mm fl ange w/serrated fl ange face
7.087 5.906 .551-D 4 — 4.311 5 170-2-35
180mm fl ange w/serrated fl ange face
8.000 7.250 .378-D 8 7.750M 3.208 4 170-2-49
Mates with std. 1710 series companion fl ange
Continued on next page