User's Manual

28
1 Overview of the access control system
Short description
The WT 210 is a compact wall terminal which combines the reader and the control electronics in a compact
unit. In combination with an electric door strike the WT 210 forms a complete offline access point.
The design of the WT 210 allows an easy installation in DIN 49073 flush-mount sockets.
The WT 210 has an opto-isolated input. This can be used to connect a pushbutton inside the protected area
which directly activates the switch output of the WT 210 for the electric strike.
The WT 210 has a tamper switch, which is triggered when the reader is removed from the mounting frame, and
it activates the integrated acoustic signal generator and the alarm relay. The alarm relay can be used to set up
a manipulation-proof access point in combination with an additional relay that is installed in the protected area.
All locking events and every removal of the device from the frame are logged in the memory of the WT 210.
The WT 210 has an RF interface through which the terminal can be configured and the audit trail can be read
out with the MDU.
WT 210 Wall Terminal
Fig. 1: WT 210 for installation in flush-mount socket, front view WT 210 rear view