Operating Manual

27
HDE 04/2016 732.29.127
Power supply over PoE „Power over Ethernet“
Fig.: Power supply ES110 „Power over Ethernet“
» Connect ES110 to PoE splitter with Cat 5 cable (A)
» Connect power cable to ES110 and PoE splitter (B)
» Connect PoE splitter to local network (C).
(See 6.2 Connecting to the local network)
6.2 Connecting to the local netwerk
Cable connection
The connection of the ES110 is made with the CAT 5 cable being delivered with
the ES110 or any equivalent network cable. In case there is no network connection
available for the ES110 an additional switch can be installed.
Behaviour of the ES110 after switching-on
After the power supply has ben plugged into the mains socket the output cable is
connected to the ES110. Now the ES110 is showing the following information
screens one after another:
10/100 Mbps Data+ Power
ES110
PoE
Splitter
10/100 Mbps
Dat
a
Power
A
C
B