Operating Manual
HDE 04/2016 732.29.127
26
6. ES 110 Set up
USB interface (E)
USB interface for manufacturing purposes, not to be used for operation.
Web-Interface
Web interface for the configuration of the ES110
Piezzo buzzer
Piezzo buzzer supporting the operator guidance.
6.1 Power supply
Power Supply with PS 6
Fig.: ES110 power supply with PS 6
» Adjust PS 6 to 5V output voltage
» Connect PS 6 to ES110
» Connect ES110 via patch cablre to local network.
(See 6.2 Connecting to the local network)
NOTE
Device damages through wrong installation!
The ES110 can be damaged through wrong installation.
• The installation of the ES 110 in a local network as well as the configuration of
the ES110 must only be carried out by a trained Dialock technician.
NOTE
Device damages through wrong supply voltage!
In case of overvoltage the electronic circuitry of the ES110 can be permanently
damaged.
• The input voltage of the ES110 must not exceed 5 V.
10/100 Mbps Data
100V – 240V
60/50Hz
ES110
PS 6