Operating Manual

HDE 04/2016 732.29.127
22
The following transponder media can be encoded or read: ISO 14443 (e.g. Mifare
Classic) and ISO 15693 (e.g. Tag-it ISO, iCode).
3. Associated docu-
ments
As well as these assembly and mounting instructions, the following document is
valid for the access control system:
Dialock terminal operating instructions
Dialock 2.0 user manual
4. Safety 4.1 Safety instructions and symbols in this document
The safety instructions in this docuemt follow a uniform concept. They start with a
signal word indicating the degree of the danger. Then there follows the source of the
danger and the measures to avoid the danger.
4.2 General safety instructions
WARNING
Warning triangle and signal word “Warning” are used to warn of a possible
dangerous situation resulting in severe personal injuries.
NOTE
The signal word "Note" is used to warn of product damages, material damages, da-
mages to the environment, or to mark important additional information.
The following safety instructions have to be adhered to during the use of
theproduct in order to avoid damages.
Electrical safety
> Avoid liquids to spill over and into the ES110 (e.g. through liquid filled con-
tainers on the workplace.
> Do not open the device except for battery change.
> Repairs must only be carried out by trained personnel.
> Use only the cables supplied originally with the ES110.
> The ES110 must not be exposed to direct sunlight and/or high temperatu-
res.
> Do not drop the device.