Operating Manual

21
HDE 04/2016 732.29.127
1. Information for in-
structions
2. Overview
1.1 Information for the operating instructions
These instructions make it possible to safely install and operate the ES110
encoding station as component of an access control system. The instructions are a
constituent of the system, and must be kept in close proximity to the system in a
location where they are accessible to the personnel at all times.
The personnel must have carefully read and understood these instructions before
starting any work. A basic prerequisite for safe working is adherence to all of the
specified safety instructions and handling instructions in these instructions.
The local occupational safety regulations and the general safety regulations for the
area of application of the system also apply.
2.1 ES110 Brief description
Fig.: Encoding station ES110 - different views
Within the Dialock access control system the encoding station ES110 is used to
program the transponder media used as keys.
Authorisation data created and administrated with the Dialock software are
transmitted to the ES110 over the TCP/IP network, and written to the transponder
media placed on the encoding station.
The ES110 can also be used to read data from transponder media being already
programmed.
The data communication with the IT ressources (server) on which the access data
are generated and administrated takes place via a TDP/IP network interface.