Operating Manual

HDE 04/2016 732.29.127
30
Now the new IP address is either entered statically, or the address setting can
occur dynamically by activating DHCP:
Fig.: IP adress setting/Activating DHCP
With Apply Changes data entries are applied.
6.3 Firmware Update
As soon as the function Firmware Update has been selected the page Firmware
Update takes place. With the function Browse the firmware file, which must be
stored on the PC (e.g. after download from www.DIALOCK SUPPORT.de) can be
uploaded to the ES110 with Update.
Fig.: Firmware Update