User Manual

05
SPEX BACK SUPPORT USER MANUAL 11
WWW.SPEXSEATING.COM
Disposal & Recycling
Your Spex Seating System is manufactured using a variety of materials, most of which can be recycled.
Once it reaches the end of its life, if you are the legal owner, do not dispose of as ordinary household
waste but take your Spex System to an approved recycling or collection point, to dispose of according
to local laws and regulations.
Separate collection and recycling of the Spex System when disposing ensures protection of the environ-
ment and assists with natural resource conservation.
Environment
Moisture: Keep your Back Support dry at all times, as contact with water or excess moisture could cause
corrosion, degradation to the functionality of your Back Support, or potential failure. If your Back Support
becomes damp or wet, thoroughly wipe with a dry cloth as soon as possible. Do not use your Back Sup-
port in a showering or pool facility.
Temperature: Your Back Support may not function as intended when used at extreme temperatures.
Keep the Back Support away from sources of extreme heat or extreme cold to avoid burns from the metal
components.
Dirt: Small particles such as dust, dirt and sand may restrict optimum functionality. Regularly check your
Back Support to ensure no build-up occurs around openings and moving parts.
Following installation and adjustment, the back can be easily removed from the wheelchair when
necessary. To remove, pull quick release latch upwards to unlock.
Once both latches are released, tilt forward and pull upwards.
Removing the Back Support
Proper re
-attachment after removal
To re
-attach the Back Support to the hardware receivers, line up the lower pins into the hook mounts and
push down into place. Once properly inserted, lock the pins into place.
Reconnecting the Back Support
Ensure that the quick release latches are securely locked into position. To double-check, try the
Back Support to ensure it is locked.
WARNING