Installation Guide

7 WWW.SPEXSEATING.COMSPEX HEAD SUPPORT USER MANUAL
Adjusting Stem Height
3mm Hex Key
1.
Loosen the grub screw in the ‘Drop Stopper’ using a 3mm hex key.
2.
Unwind the clamp lever on the mounting block and shift the stem up
or down to the new position. Tighten the clamp lever to secure.
3.
Tighten the grub screw in the ‘Drop Stopper’ to x the stem height
when taking the Head Support on and o the wheelchair.
Adjusting Horizontal, Lateral
& Angle Positions
5mm Hex Key
1.
Loosen the 5mm hex key compatible bolts on the positioning
mechanism.
2.
Move the Head Support Pad to the correct position.
3.
Securely tighten the 5mm hex key compatible bolts on the
positioning mechanism.
WARNING
Keep body parts clear during adjustment to avoid traps or pinch points, such as between the links.
Check any links that stick out from the positioning mechanism do not get in the way of the user or
wheelchair.
Operating Flip-back
(if fitted)
1.
Grip the red collar and pull up.
2.
Hold the collar up and carefully lift the head support pad away.