Installation Guide
5 WWW.SPEXSEATING.COMSPEX HEAD SUPPORT USER MANUAL
Head Support Contents
Your Head Support contains the following:
Description Quantity
A Head Support Pad 1
B Swivel Ball + Fasteners 1
C Positioning Mechanism 1
D Stem 1
E Drop Stopper 1
F Mounting Block 1
G Fasteners 2
Re-issuing to Another User
Once the user has nished using the Spex Head Support, it must be refurbished and thoroughly cleaned if it
is issued to another user. Below are the strict guidelines for refurbishing the Spex Head Support. Spex takes
no responsibility for contamination, cross infection, or damage. Spex recommends using AHP (Accelerated
Hydrogen Peroxide) disinfectant wipes. The disinfection product must be used as per the manufacturer
instructions. Spex takes no responsibility for the eectiveness of the disinfecting process.
Part Procedure
Safety check All components to be checked for signs of stress or cracking.
Upholstery covers Covers must be replaced regardless of condition.
Hardware and
components
Ensure the mechanism components are in place and in safe working order. If
any are missing, they must be ordered. Check for signs of stress or cracking. If
any stress/cracks are found the Head support is to be condemned and must be
disposed of. Clean the hardware and components with a mild detergent and
quality disinfectant ensuring all areas are free from grime.
Foam Foam pad must be replaced regardless of condition.
Disposal & Recycling
Your Spex Seating System is manufactured using a variety of materials, most of which can be recycled.
Once it reaches the end of its life, if you are the legal owner, do not dispose of as ordinary household
waste but take your Spex System to an approved recycling or collection point, to dispose of according to
local laws and regulations. Separate collection and recycling of the Spex System when disposing ensures
protection of the environment and assists with natural resource conservation.
A B C
D
E
G F