Full Product Manual

3
DANGER
• Never use the instrument if its surface or your hand is wet.
• Never open the battery cover during a measurement.
• When the device is in use, do not look directly into the laser. Permanent eye damage may result.
• Use extreme caution when operating the laser.
• Never point the device towards anyone’s eyes
• Do not try to replace the batteries if the surface of the instrument is wet.
• The instrument is to be used only in its intended applications or conditions.
• Use in other than as intended may cause instrument damage or serious personal injury.
• Keep out of reach of children.
• Do not expose the instrument to the direct sun, high temperature and humidity or dewfall.
• Use only a soft cloth dampened with water or neutral detergent for cleaning the meter.
Do not use abrasives, solvents or harsh chemicals. Allow to dry thoroughly before use.
WARNING
CAUTION
2. SAFETY WARNINGS
• This instruction manual contains warnings and safety rules which must be observed by the user to ensure
safe operation of the instrument and retain it in safe condition.
• Read through and understand the instructions contained in this manual before using the instrument.
• Keep the manual at hand to enable quick reference whenever necessary.
• The instrument is to be used only in its intended applications.
• Understand and follow all the safety instructions contained in the manual.
• It is essential that all safety instructions are adhered to.
• Failure to follow the safety instructions may cause injury or instrument damage.
The symbol indicated on the instrument means that the user must refer to the related parts in the
manual for safe operation of the instrument. It is essential to read the instructions wherever the symbol
appears in the manual.
DANGER is reserved for conditions and actions that are likely to cause serious or fatal injury.
WARNING is reserved for conditions and actions that can cause serious or fatal injury.
CAUTION is reserved for conditions and actions that can cause injury or instrument damage.
3. PREPARATION FOR MEASUREMENT
3.1. Check the condition of the meter
Do not use with visible signs of damage. Examine the housing before you use the product.
Look for cracks, missing plastic or exposed metal.
3.2. Check the battery voltage
Press the trigger to make sure the unit turns on. Confirm that the low battery symbol is not displayed on
the LCD screen. If the low battery symbol is displayed follow the instructions in Section 6, Battery Replacement.
3.3. Check the battery door
The battery door must be closed prior to operating the device. See Section 6, Battery Replacement.
00.0
0.00
˚C
˚F
SCAN
HOLD E =
MAX
+ -