Full Product Manual

sperryinstruments.com
|
33
||
32
|
sperryinstruments.com
NEW
NEW
NEW
CLAMP METERS
E1 LINE SPLITTER
DSA500A 7 FUNCTION & DSA540A 10 FUNCTION DIGITAL SNAP-AROUND
DSA200AOC OPEN JAW CLAMP METER
• ETL listed to UL
and CSA standards
• Industry standard safety test leads
• Recessed Input Terminals
• Electronic Overload Protection
• Non-contact voltage detection (DSA500)
• Relative delta displays changes
in reading (DSA540)
• 400 Amp non-contact current reading
• Data hold capability to maintain
reading on display
• Auto power off functionality to save battery life
• Compact lightweight design
• Includes convenient carrying case
• Operates from (3) AAA batteries
, included
DSA500A
E1
• For use with any clamp meter
• 1x and 10x measuring capability
• Probe slots for voltage measurement
DSA540A
Range Accuracy
AC Current
40A ±(3.0%+8)
400A
40.0-299.9A ±(3.5%+6)/
300.0-400.0A ±(4.0%+6)
AC Voltage
4V/ 40V/ 400V/ 600V ±(2.0%+5)
DC Voltage
400mV/ 4V/ 40V/ 400V/ 600V ±(1.5%+5) )
DC Current
40A ±(3.0%+8)
400A
40.0-299.9A ±(3.5%+6)/
300.0-400.0A ±(4.0%+6)
Resistance
400Ω/ 4kΩ/ 40kΩ/ 400kΩ/ 4MΩ/ 40MΩ ±(2.0%+5)
Capacitance
50.00nF ±(4.0%+25)
500.0nF/ 5.000uF/ 50.00uF/ 100.0uF ±(4.0%+5)
Frequency
10Hz~1MHz ±(0.1%+3
10MHz Undefined
Diode Test
3
Continuity
3
DSA500A
Range Accuracy
AC Current
200A/ 400A ±(2.0%+5)
AC Voltage
2V/ 20V/ 200V/ 600V ±(2.0%+5)
DC Voltage
200mV/ 2V/ 20V/ 200V/ 600V ±(1.5%+5)
Resistance
200Ω/ 2kΩ/ 20kΩ/ 200kΩ/ 2MΩ/ 20MΩ ±(2.0%+5)
Diode Test
3
Continuity
3
DESIGNED TO BE SIMPLE TO USE WITH ADVANCED PERFORMANCE
The DSA540A Sperry Instruments Clamp Meter is a 10 function, 26 range auto-ranging unit with non-contact voltage detection
engineered to measure AC/DC Current (40-400A), AC/DC Voltage (400/600V), Resistance (400/4000Ω), Frequency, and Continuity.
Advanced data management including relative measurement and data hold. Ships with carry case, heavy duty leads and three
AAA batteries included in the package.
DSA540A
• Auto Ranging
• Manual Range Mode
• Data Hold
• Overload protection
• Over-range indication
• Polarity indication
• Low Battery Indicator
• Auto Shut off
• Built-in Lead Storage
• Includes Carrying Case
• Operates from (2) AAA batteries, included
DSA200AOC
3999 count
backlit screen
13mm Open jaw
design for ease of
measurement
DSA200AOC
Range Accuracy
AC Current
200A ±(3.0%+3)
AC Voltage
4V/ 40V/ 400V ±(0.8%+5)
600V ±(1.0%+10)
DC Voltage
400mV ±(0.8%+3)
4V/ 40V/ 400V ±(0.7%+1)
600V ±(0.8%+3)
Resistance
400Ω ±(1.2%+3)
4kΩ/ 40kΩ/ 400kΩ ±(1.0%+2)
4MΩ ±(1.2%+2)
40MΩ ±(2.0%+3)
Capacitance
4nF Not Guaranteed
40nF/ 400nF/ 4µF/ 40µF ±(4.0%+10)
100µF ±(8.0%+10)
Frequency
10Hz/ 100Hz/ 1kHz/ 10kHz/ 100kHz ±(1.5%+1)
Duty Cycle
1% - 99%
1Hz - 10kHz ±(2.0%+5)
≤10Hz not specified
Diode Test
3
Continuity
3
E1 Range
Operational Voltage
120V AC
AC Current
15A
Frequency
50/60Hz
For use with
any clamp meter
Probe slots for
voltage measurement
NECESSARY ACCESSORIES
The E1 Line Splitter is a must-have accessory for clamp meters. The non-contact current capability of a clamp meter
requires the isolation of a single conductor to measure the current, placing the jaws around a power cord does not give an accurate
reading. In applications where the separation of the wires can endanger the integrity of the insulation or where machinery uses an
integrated plug, the Line Splitter will split the current loop for convenient measurement. The E1 can be used in either a single loop
measurement or a 10 times magnifying loop for accurate measurement of low current applications. This handy Line Splitter also
includes convenient probe ports to measure voltage as well.
600V
300V
600V