ATC Probe 850082 Instruction Manual SPER SCIENTIFIC LTD.
TABLE OF CONTENTS I. INTRODUCTION ............................................................................. 2 II. PANEL DESCRIPTION ................................................................... 2 III. MEASUREMENT PROCEDURES .................................................. 3 IV. SPECIFICATIONS .......................................................................... 3 VII. WARRANTY.................................................................................... 4 I.
III. MEASUREMENT PROCEDURES • Plug probe into the PROBE INPUT SOCKET. • Make sure the PROBE LOCK is in the lock position. • Turn on the instrument by pressing the POWER button. • Immerse the PROBE HEAD into the solution to be measured. • Press the A (°C/°F) button to select Centigrade or Fahrenheit. The temperature is shown on the lower display. Refer to the Water Quality Meter 850081 Instruction Manual for complete instructions about Hold, Max./Min, RS232, Auto Shut Off, and other functions. IV.
ONE YEAR WARRANTY Sper Scientific warrants this product against defects in materials and workmanship for a period of one year from the date of purchase, and agrees to repair or replace any defective unit without charge. If your model has since been discontinued, an equivalent Sper Scientific product will be substituted if available. This warranty does not cover damage resulting from accident, misuse, or abuse of the product.
