IR Temperature Probe 850076 Instruction Manual SPER SCIENTIFIC LTD.
TABLE OF CONTENTS I. INTRODUCTION ............................................................................. II. PANEL DESCRIPTION ................................................................... III. MEASUREMENT PROCEDURES .................................................. IV. SPECIFICATIONS .......................................................................... VII. WARRANTY.................................................................................... I.
III. MEASUREMENT PROCEDURES • Plug probe into the PROBE INPUT SOCKET. • Make sure the PROBE LOCK is in the lock position • Turn on the instrument by pressing the POWER button. • Point the probe toward the source to be measured. The distance-tospot (D/S) ratio is approximately 7 to 1. Press the °C/°F (A) button to select Centigrade or Fahrenheit. The temperature is displayed on the LCD. Refer to the Environmental Quality Meter 850071 Instruction Manual for complete instructions about Hold, Max.
Emissivity Setting 0.95 Measurement Wave Length 6 ~ 12 micro meters Field Distance/Spot Approximately 7:1 Probe Size Diameter: 1.6" (40mm). Length: 6" (150mm). Refer to the Environmental Quality Meter 850071 Instruction Manual for meter specifications. ONE YEAR WARRANTY Sper Scientific warrants this product against defects in materials and workmanship for a period of one year from the date of purchase, and agrees to repair or replace any defective unit without charge.
