FIXED-VOLUME PIPETTORS 300107 - 300116 Instruction Manual SPER SCIENTIFIC LTD.
TABLE OF CONTENTS I. INTRODUCTION ............................................................................. II. DESCRIPTION ............................................................................... III. MEASUREMENT PROCEDURES .................................................. IV. SPECIFICATIONS .......................................................................... VII. WARRANTY.................................................................................... I.
III. MEASUREMENT PROCEDURES 1. Secure a pipette tip to the TIP of the unit. 2. Holding the unit vertically, depress the PLUNGER to the first stop. Next fully immerse the TIP 2 to 4 mm into the solution. 3. Slowly release the PLUNGER until it returns to the original position. 4. Remove the unit from the solution after 1 to 2 seconds. 5. To discharge the solution from the pipette tip, place the TIP against the inside wall of the receptacle.
TWO YEAR WARRANTY Sper Scientific warrants this product against defects in materials and workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective unit without charge. If your model has since been discontinued, an equivalent Sper Scientific product will be substituted if available. This warranty does not cover damage resulting from accident, misuse, or abuse of the product.
