Certifications 2

Safety Data Sheet according to
Regulation
(EC) No. 1907/2006 (REACH)
KH 67
Print date: 23.02.2018
Version 1.1
Page
:
4
/
8
Page 4 of 8
8. Exposure controls/personal protection:
8.1 Control parameters
Remark
Does not contain substances above concentration limits fixing an occupational exposure limit.
8.2 Exposure controls
Appropriate engineering controls
Technical measures to prevent exposure
Refer to chapter 7. No further action is necessary.
Personal protection equipment
Eye/face protection
Suitable eye protection:
Eye glasses with side protection
Skin protection
Suitable gloves type:
Gloves with long cuffs
Suitable material:
NBR (Nitrile rubber)
CR (polychloroprene, chloroprene rubber)
Breakthrough time (maximum wearing time) >480 min
Thickness of the glove material >0,4 mm
Wearing time with occasional contact (splashes): >480 min
Recommended glove articles
DIN-/EN-Norms:
DIN EN 374
Additional hand protection measures
Take recovery periods for skin regeneration.
Remark
When handling with chemical substances, protective gloves must be worn with the CE-label including
the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a
function of the specific working place concentration and quantity of hazardous substances.
Body protection:
Suitable protective clothing:
Chemical protection clothing
Respiratory protection
Respiratory protection necessary at:
insufficient ventilation
dust formation
remark
Usually no personal respirative protection necessary.
9. Physical and chemical properties:
9.1 Information on basic physical and chemical properties
Appearance
Physical state
liquid
Colour
as per labelling
Odour
characteristic