User Manual

9
Installation
1. Determine how to mount the ESC/Receiver as specified by your
vehicle’s instruction manual, or in an area with adequate airflow
and protection from damage. Ensure all wiring connections can
be reached prior to mounting. For the best reception performance
choose a mounting arrangement that will put the antenna as high
as possible in the vehicle, away from metal or carbon fiber.
2. Use double-sided foam tape or the mounting tabs with
screws on the bottom of the case to secure the ESC in
position. The switch can be mounted with double sided
foam tape.
3. Connect the red power connectors together and the black
power connectors together between the ESC and the motor.
4. If you need to reverse the motor direction you can reverse the
power connections between the motor and ESC.
5. Secure all wiring and ensure the 2-in-1 has good airflow.
NOTICE: Do not cut, kink, or modify the antenna. Damage to
the antenna or shortening it will reduce the range.