Quick Start Guide
©2021 Horizon Hobby, LLC. All Rights Reserved.
2904 Research Rd • Champaign, IL • 61822 • 800.338.4639• horizonhobby.com
FC6250HX PC Programmer Beta V1
Quick Start Guide October 8, 2021
Running the PC Application
1. Connect the SPMA3065 USB Programming Cable
2. Click the FC6250HX desktop icon creating during installation
3. If the application mentions you need to install the USB cable driver follow the prompts and
instructions provided.
4. If using a remote receiver in the data/bind/rx2 port you will need to disconnect this before
connecting the SPMA3065.
5. Connect the SPMA3065 Programming cable to the data/bind/rx2 slot on the FC6250HX with
firmware v5.4 or later.
6. Although you can power the fc6250hx via the USB programming cable it is recommended to
use a receiver battery instead to ensure you have enough power to operate the servos and
other onboard electronics.
7. If you decide to power via the USB cable make sure all power sources are disconnected
from the FC6250HX before clicking the [Power Cable] button. Standalone fc6250hx +
remote receivers are okay to power via the Power Cable option.
8. Do not connect an external power source to the fc6250hx while the Power Cable option is
selected or you may damage your computer.