User manual

TIMERS

Timers 1-3 can be conﬁgured to be either an Up, Down or Lap Timer.

Up Timer-

The Up Timer counts up, functioning as a stopwatch

when triggered via a selectable button/switch. It

is useful for timing a fuel run to determine fuel

mileage/pit stop strategy or, for electrics, to time the

run time of a pack to determine gear ratio and setup

information.

• Select minutes (0-599) and seconds (0-59) by

tapping in the appropriate box.

• Select the button or switch to activate, pause and

reset the timer.

• This timer can also be paused or reset on the

main DashBoard screen.

Down Timer-

The down Timer counts down, when triggered via

a selectable button/switch. When the down timer

expires, an Alert will sounds and the timer begins to

count up.

• Select minutes (0-599) and seconds (0-59) by

tapping in the appropriate box.

• Select the button or switch to activate, pause and

reset the timer.

• This timer can also be paused or reset on the

main DashBoard screen.

Rolling Lap Timer-

Start the Rolling Lap Timer via a selectable

programmable switch. When the timer expires, an

alarm sounds and the Lap timer resets and begins

to count down again.

• Select minutes (0-599) and seconds (0-59) by

tapping in the appropriate box.

• Select the button or switch to activate, pause and

reset the timer.

• This timer can also be paused or reset on the

main DashBoard screen.

IMPORTANT: Conﬁgure the Timers Alert type (Tone, Vibrate, Tone + Vibrate or

Voice), by going to the ALERTS screen in SETUP.