User Manual

23
SPEKTRUM DX5 PRO • TRANSMITTER INSTRUCTION MANUAL
EN
With this function you can sort the model order in the model
select function. This is helpful to group similar models together
to make them easy to nd. To move a model, highlight the model
that you wish to move with the scroll wheel, then click the scroll
wheel to select it. Scroll the scroll wheel to move the selected
model to the position desired. Click the scroll wheel when you
have the model in the position desired.
SYSTEM SETUP
Sort Model List
Transfer sd card
Import model
Export model
The SD Card enables drivers to:
To import an individual model file from the SD Card:
1. Save the model le to the SD Card and insert into the
transmitter.
2. In the Transfer SD Card menu, scroll to Options and click
the scroll wheel once.
3. Scroll to Import Model and press the scroll button again to
save the selection. The Select File screen appears.
4. Select the model le you wish to import. The Import Model
screen appears.
5. Select Import to save the model to the transmitter. The new
model will be appended to the end of the model list.
Import All Models
To import all models from the SD Card:
1. Select Import All Models.
2. Conrm by selecting IMPORT.
IMPORTANT: After importing a model, you
must rebind the transmitter and receiver.
You can use the Export Model option to export a single model le
to the SD Card.
1. Make sure the active model le is the one you wish to Export.
2. In the Transfer SD Card menu, scroll to Options and click
the scroll wheel once.
3. Scroll to Export Model and click the scroll wheel again to
save the selection. The Export to SD screen appears. The
rst two characters of the le name correspond to the
Model List number (01, for example).
4. Select Export to save the le to the SD Card. When the export is
complete, the transmitter returns to the SD Card Menu screen.
Export All Models
To export all models to the SD Card:
1. Select Export All Models in the Transfer
SD Card Menu options. The Export All
Models screen appears.
IMPORTANT: Export All Models will
overwrite any model les that have the
same name. Always save model les to a
different SD card if you are not sure.
2. Select Export to overwrite les on the SD Card
or Cancel to return to the SD Card Menu.
• Import model(s) from another DX5 Pro
transmitter
• Export model(s) to another DX5 Pro
transmitter
• Update rmware in the transmitter
(covered under the SD card section of
this manual)