User Manual

17
SPEKTRUM DX5 PRO • TRANSMITTER INSTRUCTION MANUAL
EN
FUNCTION LIST
Drive Mode
Every model can have up to 5 drive modes programmed to a
switch or button for On-The-Fly adjustments.
Once a drive mode is selected, changes may be made to various
functions from a single switch selection. Where as normally
functions are limited to one switch at any time, with a drive mode
enabled, multiple functions tied to a single switch let a driver
make quick changes.
For initial tuning individual switch selections are ideal, but once
settings are found, the Drive Mode function lets drivers group
settings for specifi c conditions.
Select the On The Fly (OTF) switch to
switch between drive modes.
1. Scroll down to Modes; Drive Mode 1
and click the scroll wheel to rename
the mode if desired.
2. Select the (+) to add a new Drive
Mode. Up to fi ve modes may be
added.
Lap Timer
Lap timing with the DX5 Pro can be triggered with the Spektrum
lap timing telelmetry system, or may be triggered manually with
a switch.
1. Select the Lap Timer menu in the Function List.
2. Confi gure the timer mode and set the maximum number
of laps.
3. In the Trigger selection, choose Telemetry if the Spektrum
Lap timing system sensor is connected to the X-Bus
connection on the receiver.
4. To log lap times onto an SD card, determine the fi le name
and change the option for Enabled? to Yes.
5. Select NEXT to choose event reporting options. This is
where to confi gure how and when the transmitter indicates
a lap has been counted (vibration or tone).
Lap Timer Telemetry Screen
6. Access the Lap timing telemetry menu by scrolling right from
the home screen.
7. Select Review to view times from previous heats.
Lap Time
Total Heat
Time
Lap Gate
57840 SPM DX5 Pro DSMR Tx Manual_BOOK 1757840 SPM DX5 Pro DSMR Tx Manual_BOOK 17 4/26/18 2:56 PM4/26/18 2:56 PM