User manual

28 SPEKTRUM DX20 • TRANSMITTER INSTRUCTION MANUAL
ENEN
The System Settings menu consists of four screens:
System Settings, Extra Settings, Serial Number and Calibrate.
Select NEXT or PREV to move between screens.
The User Name field displays your name in the lower right corner
of the main screen.
To Program a User Name:
1. Scroll to User Name and press the scroll wheel. The User
Name screen appears.
2. Scroll to the desired character position and press the scroll
wheel. Scroll left or right to change the character and press
the scroll wheel to save the selection. The User Name can
containamaximumof20characters,includingspaces.
3.PresstheBackbuttontosavetheUserNameandreturntothe
System Settings screen.
To adjust the screen contrast:
1. Scroll to Contrast and press the scroll wheel.
2. Scroll left or right to adjust the contrast value. Lower numbers
lighten the contrast, higher numbers darken it.
3.Pressthescrollwheeloncetosavetheselection.
SYSTEM SETUP
SYSTEM SETTINGS
The transmitter includes a set of default sound categories, with
theoptiontoaddyourown(uptoatotalof16categories).You
may also modify or remove the default sound categories. Sound
Categories can be accessed from any screen that enables you to
select a sound.
1. To select a sound, highlight the sound and then press the
roller.
2. To select a sound from a different Sound Category, highlight
Select Category and then press the roller. Select the desired
sound from the list.
3. To add a sound to a different Sound Category, select
Add Sound to Category. A sound can appear in as many
categories as you wish.
4. The default Sound Category is All Sounds. To change the
default Sound Category, select Sort Categories then move the
desired category to the top of the list.
5. To remove a Sound Category, select Rename/Delete Category
and then edit the name. Change the first character of the
nametoablankspace.Whenyouexitthescreen,the
category will be removed.
Allowanyanaloginput(stick,knob,orlever/slider)toprovide
feedback when passing through center. In addition, this function
allows you to disable the center tone that normally occurs on the
knob and sliders. On voice-capable radios, a spoken alert can be
made.
Tip: This will not provide telemetry-like data; only the specified
sound will be played.
Sound Utilities
Center Tone

User Name

Contrast