User manual

19SPEKTRUM DX20 • TRANSMITTER INSTRUCTION MANUAL
EN
Enables you to assign custom names to the Flight Mode positions.
Flight Mode names can include up to 20 characters, including
spaces.
To change the Flight Mode name:
1. Scroll to the Flight Mode name you wish to change and press
the scroll wheel.
2. Scroll to the character position you wish to change and press
thescrollwheelonce.Aashingboxappears.
3.Scrollleftorrightuntilthedesiredcharacterappears.Press
the scroll wheel once to save the character. Insert a character
by selecting <+> or delete a character by selecting <->.
4. Repeat Steps 2 and 3 until the Model Name is complete.
5.SelectBACKtoreturntotheFlightModeNameslist.
Spoken Flight Mode:
The Spoken Flight Mode option enables you to activate audio flight
mode alerts. As you change between flight modes, the transmitter
will “speak”, informing you of the active flight mode. You can select
a word or phrase for each flight mode.
To activate Spoken Flight Mode:
1. Enter the Spoken Flight Mode menu option.
2.Scrollto<Silence>(default),thenpressthescrollwheel.
3. Scroll left or right to view the options.
4.Pressthescrollwheelagaintosavetheselection.
The Channel Assignment function allows you to reassign almost
any receiver channel to a different transmitter channel. For
example,thereceivergearchannelcouldbere-assignedtothe
transmitter throttle channel.
1. Scroll to the receiver channel you wish to change.
2.Pressthescrollwheelonceandscrollleftorrighttochange
the receiver input selection.
3.Pressthescrollwheelasecondtimetosavetheselection.
IMPORTANT:Youcannotassignamixtoachannelthathasbeen
moved.Createthemixrst,thenmovethechannel.
The Channel Input Configuration screen enables you to assign a
transmitter channel to a different control stick or switch.
1. Select NEXTontheRXPortAssignmentsscreentoaccessthe
Channel Input Configuration screen.
2. Scroll to the transmitter channel you wish to re-assign and
pressthescrollwheel.Theboxaroundthecurrentinput
selection flashes.
3. Scroll left or right to select the desired control stick or switch.
4.Pressthescrollwheeltosavetheselection.
SYSTEM SETUP
Spoken Flight Mode Setup
Channel Assignment

Channel Input Configuration
See the “Programming Failsafe Positions” section on page 12 for
Throttle limitations.